Xerox Workcentre 390 Toner - Able To Keep Up With Your Printing Demands
An all in one printer that is convenient to have is the WorkCentre 390 printer. It is a useful printer to have in the office and can, also, be used in homes. The size makes this printer opportune. Instead of the older, large model all in one printers, the WorkCentre 390 is a small transferable printer.
The WorkCentre 390 was made to replace its brother printer, the WorkCentre 385. The WorkCentre 390 has many other functions than just printing. It is, also, a copier, fax machine, and a color scanner. The printer and copier both put out pages at ten per minute. The printer has a 600×600 dpi and the copier has a 4800 dpi. The paper tray allows for up to 150 sheets of paper to allow for large jobs at once.
With a six second function, the scanner and fax machine on the WorkCentre 390 do a good job, too. The time it takes for the information to transfer from PC to printer may vary, though. The fax has a speed dial function capable of holding up to 80 numbers. The WorkCentre 390, also, has a two megabyte memory and can use a USB interface. The printer can be used when needing to print on different types of documents such as card stocks, envelopes, and labels. The printer is capable of reducing or enlarging a document.
The WorkCentre 390 comes with many other features. Some of those features are the three different trays, which are the document input tray, a printer exit tray, and a document exit tray. The cords needed to use the printer with your PC are, also, found with the printer. These are a 6 foot PC cord, a 6 foot USB cord, an AC power cord, and a telephone cord. The printer also includes the first cartridge for the printer.
The installation process for the WorkCentre 390 is very simple. It comes with two detailed guides. One covers the installation process while the other goes over the main features on the printer. So, anyone new to this type of printer should have no problem figuring it out.
The printer comes with the first toner you will use. The Workcentre 390 Toner Cartridge is ready to go in after you have completed the first of installations. After opening the cartridge make sure to shake it up to spread out the toner and make it evenly disperse. Next, there is a sealing tape located on the toner that will need to be removed carefully. After, removing the tape carefully grasp the handle and place it into the printer. It should snap into place. Once you have the Workcentre 390 Printer Toner Cartridge comes with the printer. The first cartridge is included and has an easy installation process. First open the cartridge and shake it up to make sure the toner is evenly spread. Next, there is a piece of sealing tape that needs to be removed from the cartridge before it can be used. After removing the sealing tape, hold the grasp and place it in the printer. It should click into place. After the Xerox Workcentre Compatible Toner Xerox Workcentre 390 Toner is in place, all that is left to close the lid and you are done.
When looking for more Workcentre 390 Cartridge, you do not have to go much further than your computer. It is found at many printer websites, including Xerox. Sometimes you may be able to find the toner for around $8 but most of the time the only toner found is the Xerox brand which runs about $98. Although it costs more, it covers all parts of the printer, and you will not have to worry about it not working right.
The WorkCentre 390 is a simple all in one printer that is convenient to have no matter what you are using it for. With an easy installation process, it is hard to pass up. Also. The Workcentre 390 printer toner is easy to install as well and can be found in many places. The Xerox Workcentre Compatible Toner is a useful little device. For more information, check out our site http://www.qtoner.us..